Liquidleds
Liquidleds VoltSwitch Driver 12/24V Switchable IP20 Non-Dimmable
In stock
Checkout is secure. Enter your postcode below for the delivery price, or collect from the Kensington showroom.
Delivery to your postcode
About this product
The Dulora VoltSwitch Driver is a dual-voltage constant voltage LED driver with a built-in 12V/24V selector switch, giving you the flexibility to power both 12V and 24V LED installations from a single unit. Simply set the onboard voltage selector to 12V or 24V during installation to match your lighting setup. Designed for non-dimmable applications where reliable, clean power delivery is the priority, the VoltSwitch simplifies stock management for installers and reduces the risk of specifying the wrong voltage driver on site.
Key Features
- 12V/24V Switchable Output: A single physical switch lets you select between 12V and 24V output, so one driver covers both voltage requirements without stocking separate units.
- Universal Input Voltage: 100-240VAC input means the VoltSwitch works on any mains supply worldwide, from Australian 230V through to 110V systems.
- Constant Voltage Regulation: Delivers stable, consistent power to LED globes and strip, ensuring uniform brightness without voltage drop across longer cable runs.
- Compact IP20 Design: Slim form factor fits comfortably inside ceiling voids, cabinetry, and standard mounting locations for indoor installations.
- Wide Wattage Range: Available from 20W through to 100W, covering small accent lighting zones through to larger multi-globe circuits.
- Simplified Stock Management: One SKU replaces two, reducing inventory complexity for electricians, contractors, and resellers.
Ideal Applications
Non-dimmable LED strip installations, under-cabinet and display lighting, signage and channel letter lighting, and any indoor low-voltage application where dimming is not required. Pair with Dulora 12V or 24V non-dimmable globes and LED strip for guaranteed compatibility.
Sizing Guide
Add up the total wattage of all globes or LED strip on the circuit. Select a driver with at least 20% headroom above the total load. For example, a 5-metre LED strip run at 30W total would pair with the 40W driver.
Specifications
| Variant | Output Voltage | Output Current | Dimensions (L x W x H) |
|---|---|---|---|
| 20W | 12V / 24V DC (switchable) | 1.66A (12V) / 0.83A (24V) | 128 x 50 x 20 mm |
| 40W | 12V / 24V DC (switchable) | 3.33A (12V) / 1.66A (24V) | 160 x 58 x 20 mm |
| 60W | 12V / 24V DC (switchable) | 5A (12V) / 2.5A (24V) | 185 x 63.5 x 22 mm |
| 100W | 12V / 24V DC (switchable) | 7A (12V) / 4.16A (24V) | 185 x 63.5 x 22 mm |
Two voltages. One driver. Simplified.
SKU TEK-20W-12/24. Product photography from the supplier.
You may also like
