Liquidleds OmniDim Driver 5-in-1 Dimmable IP20 Indoor

About this product

The Dulora OmniDim IP20 is a universal constant voltage LED driver built for indoor installations where precise dimming control matters. With 5-in-1 dimming compatibility across TRIAC, 0-10V, 1-10V, PWM, and potentiometer protocols, a single driver covers virtually every dimming system you will encounter, eliminating the need to stock protocol-specific units.

Key Features

• 5-in-1 Universal Dimming: Compatible with TRIAC (leading and trailing edge), 0-10V, 1-10V, PWM, and potentiometer dimming, giving you full flexibility across residential and commercial projects.
• Deep Dimming to 0.1%: Smooth, flicker-free dimming from 100% down to 0.1%, delivering precise atmosphere control that most drivers simply cannot match.
• 12V and 24V Options: Available in both 12V and 24V output configurations to suit MR16, G4, and low-voltage strip or globe installations.
• Compact Slim Profile: Ultra-thin plastic housing designed to fit inside ceiling voids, joinery cavities, and tight mounting spaces where traditional drivers cannot reach.
• Built-In Protection: Short-circuit, over-temperature, and over-load protection safeguards both the driver and your installation.
• SELV Safety Rated: Safety Extra Low Voltage certification means the output circuit is fully isolated, safe for installations in accessible locations such as joinery, shelving, and under-cabinet runs.
• IP20 Rated: Engineered for dry, indoor environments, including residential downlight zones, under-cabinet runs, and display lighting.

Ideal Applications

Residential MR16 downlight circuits, under-cabinet LED strip installations, display and joinery lighting, and any indoor low-voltage lighting project requiring smooth, dimmable control. Pair with Dulora MR16, G4, or 24V low-voltage globes for guaranteed compatibility.

Sizing Guide

Add up the total wattage of all globes on the circuit. Select a driver with at least 20% headroom above the total load. For example, four 12W MR16 globes at a total load of 48W would pair with the 60W driver. The OmniDim performs reliably from 10% to 100% of its rated load, so oversizing for future expansion is perfectly fine.

Specifications

Variant	Output Voltage	Output Current	Dimensions (L x W x H)
30W 12V	12V DC	2.5A	125 x 45 x 14.5 mm
30W 24V	24V DC	1.25A	125 x 45 x 14.5 mm
60W 12V	12V DC	5A	145 x 53 x 16.5 mm
60W 24V	24V DC	2.5A	145 x 53 x 16.5 mm
100W 24V	24V DC	4.16A	185 x 56 x 19 mm

One driver. Every protocol. No compromises.